In timber and firewood measurement, the 'top cut' (or top diameter) is the diameter measured at the smaller, narrower end of a log โ the conservative measurement commonly used as a basis for volume estimates because it accounts for the log's natural taper. This calculator estimates log volume from the top diameter and length, with an optional bottom diameter for a more accurate tapered (Smalian's formula) estimate.
This is a simplified geometric estimate, useful for getting a rough sense of volume when buying or selling firewood, assessing a fallen log, or planning timber needs around the property. It is not a substitute for a proper measurement by a registered timber measurer, which is what's required for commercial timber transactions in Australia โ use this tool for general estimation only.
How top-diameter volume estimation works
Using only the top diameter, the simplest estimate treats the log as a cylinder: volume = ฯ ร (radius)ยฒ ร length, using the top diameter's radius. This is deliberately conservative because it ignores the extra wood in the wider base of a tapered log, which is useful when you want to avoid overestimating available timber or firewood.
If you also know the bottom (large end) diameter, a more accurate tapered estimate uses Smalian's formula, which averages the cross-sectional areas of the two ends: volume = ((area at top + area at bottom) รท 2) ร length. This accounts for the log's taper and generally gives a closer estimate to the log's true volume than the top-diameter-only cylindrical method.
Why this is an estimate, not a commercial measurement
Real logs are rarely perfectly round or perfectly tapered, and bark, sweep (curvature) and irregular shape all affect true volume in ways a simple formula can't capture. For firewood splitting or rough on-property planning, this kind of estimate is genuinely useful. For any commercial timber sale or purchase in Australia, however, volume should be determined by a registered timber measurer using recognised measurement standards, not an online estimate.
Frequently asked questions
Top diameter (or 'top cut') is measured at the narrower, upper end of a log; bottom diameter is measured at the wider, lower end nearer where the tree was felled. Logs taper, so the bottom is almost always larger.
No โ you can get a simple, conservative estimate using only the top diameter and length. Adding the bottom diameter (if known) gives a more accurate tapered estimate via Smalian's formula.
Treat it as a general estimate only. For commercial timber or firewood transactions, volume should be assessed by a registered timber measurer using recognised Australian measurement standards.
Top-diameter measurement is a common, conservative convention in timber and firewood estimation because it's easy to measure consistently and avoids overestimating volume from the wider base.