Caravan tyre pressure should be set based on the actual load the tyre is carrying, not a generic 'standard' pressure — under-inflation relative to load is a leading cause of caravan tyre failure and blowouts, particularly on longer trips in hot weather where heat build-up compounds the risk.
This calculator gives a rough linear estimate based on your tyre's load/pressure relationship — but tyre manufacturers publish exact load/inflation tables specific to each tyre model, which should always be your definitive reference, not this general approximation.
Why load-based pressure matters so much for caravans
Unlike a car (where load varies relatively little trip to trip), a caravan's actual loaded weight varies significantly based on what's packed — water tanks full or empty, gas bottles, general cargo — and tyre manufacturers design their load/inflation charts specifically because pressure needs to scale with actual load to maintain the tyre's proper contact patch and heat dissipation. Always weigh your van (a public weighbridge is the reliable way) and check your specific tyre's chart rather than assuming a fixed 'caravan pressure' applies regardless of how loaded you are.
Frequently asked questions
No — pressure should reflect your actual loaded weight when towing, which is typically higher than an empty or storage weight. Check your tyre's specific load/inflation chart for the pressure appropriate to your actual travelling load.
Before every trip, and ideally at each fuel/rest stop on a long journey, since pressure changes with temperature and slow leaks can develop unnoticed — caravan tyres often sit unused between trips, which can also allow pressure to drop over time.
No — this gives a rough linear approximation only. Manufacturer load/inflation tables are based on actual tyre engineering data specific to each model and are always the more accurate and authoritative reference.