๐Ÿ‡ฆ๐Ÿ‡บ Free Australian calculators โ€” rates updated for FY2026โ€“27
Automotive & Towing

Towing Capacity Calculator

Work out your vehicle's real available towing capacity โ€” not just the maximum braked rating on the spec sheet.

๐Ÿ•’ Updated September 2026๐Ÿ‡ฆ๐Ÿ‡บ Australia-specific๐Ÿ’ฏ Free, no signup

๐Ÿงฎ Calculate your available towing capacity

The 'maximum towing capacity' printed in a vehicle's brochure is almost never the amount you can actually tow once the vehicle is loaded with passengers, fuel, and gear โ€” because that maximum figure typically assumes the vehicle itself is empty except for the driver. Once you add family, luggage, fuel and accessories, your genuinely available towing capacity is usually meaningfully lower, and is limited by whichever of two figures is smaller: the braked towing rating, or the Gross Combination Mass minus your actual loaded vehicle weight.

This calculator applies both checks so you can see your real available capacity, not just the marketing figure.

The two limits that actually matter

1. Braked towing capacity โ€” the manufacturer's maximum rated trailer weight, found on the vehicle's compliance plate.

2. GCM minus actual vehicle weight โ€” your Gross Combination Mass (the maximum combined weight of loaded tow vehicle plus loaded trailer) minus how much your vehicle actually weighs right now, loaded with everything you're carrying.

Your real available towing capacity is whichever of these two numbers is smaller โ€” many drivers are legally over their GCM (and therefore over their real limit) while still technically under the vehicle's advertised maximum braked towing rating, simply because they didn't account for their own loaded vehicle weight.

Tow ball weight matters too

As a rough guide, tow ball (down) weight is commonly recommended at around 10% of the trailer's actual loaded weight, and this weight counts toward your vehicle's payload/GVM, not just the trailer's own weight rating. Too little tow ball weight can cause dangerous trailer sway; too much can overload your vehicle's rear axle or exceed its GVM. Get your combination weighed at a public weighbridge if you're at all close to any of these limits.

Frequently asked questions

What's the difference between GVM, GCM and towing capacity?+

GVM (Gross Vehicle Mass) is the maximum weight of the vehicle alone, loaded. GCM (Gross Combination Mass) is the maximum combined weight of the loaded vehicle plus a loaded trailer. Towing capacity is the manufacturer's separate maximum rating for the trailer alone โ€” your real limit is whichever of towing capacity or (GCM minus actual vehicle weight) is smaller.

Can I exceed the manufacturer's towing capacity if I upgrade my suspension or brakes?+

No โ€” towing capacity, GVM and GCM are all manufacturer-set compliance limits tied to the vehicle's design and certification, not something that can be legally increased through aftermarket modifications alone, regardless of upgraded components.

How much should my tow ball weight be?+

Commonly recommended at around 10% of the trailer's actual loaded weight, though always check your specific vehicle and trailer/caravan manufacturer's guidance, and confirm your tow ball weight doesn't push your vehicle over its own payload or GVM limit.

Where do I find my vehicle's exact GCM and towing figures?+

On the vehicle's compliance plate (usually in the door jamb or engine bay) and in the owner's manual โ€” always use the manufacturer's exact figures for your specific vehicle and model year, not a general figure for the model range.

General information only. This calculator provides estimates for planning purposes and does not constitute financial, tax, legal or medical advice. Figures are based on publicly available Australian rates and rules current as of September 2026; always confirm specifics with the ATO, a licensed adviser, or the relevant government body before making a decision.

Related calculators