Getting a 2-stroke fuel mix wrong in either direction causes real problems — too little oil risks engine seizure from inadequate lubrication, while too much causes excessive smoke, fouled spark plugs and carbon build-up. Different equipment (chainsaws, brushcutters, outboard motors, older vs newer engines) commonly specify different ratios, so always check your specific manufacturer's recommendation rather than assuming a single 'standard' ratio applies to every 2-stroke engine.
This calculator converts your fuel quantity and chosen ratio directly into millilitres of oil needed.
The formula
Oil needed (mL) = Petrol (litres) × 1000 ÷ Ratio number. For example, 5 litres of petrol at a 50:1 ratio needs 5000 ÷ 50 = 100mL of 2-stroke oil.
Always check your specific equipment's manual — older equipment often specifies richer ratios like 25:1 or 32:1, while many modern small engines use leaner 40:1 or 50:1 ratios with specific quality 2-stroke oils.
Frequently asked questions
100mL of 2-stroke oil (5000mL ÷ 50). Use the calculator above for any other fuel quantity or ratio.
Inadequate lubrication can cause overheating, excessive wear, and in serious cases, engine seizure — always err on the side of the manufacturer's specified ratio rather than guessing leaner to save on oil.
Check your equipment manufacturer's recommendation — some oils are specifically formulated for leaner ratios (50:1, 100:1) and may not provide adequate lubrication at those ratios if not designed for it.