This calculator works out a vehicle's power-to-weight ratio in kilowatts per tonne (kW/t) by dividing engine power (in kW) by vehicle weight (converted to tonnes). It's a genuine, widely used performance metric for comparing how quickly different vehicles can accelerate relative to their mass โ a 200kW car weighing 2 tonnes (100 kW/t) will generally feel punchier than a 200kW car weighing 2.5 tonnes (80 kW/t), despite having identical engine output.
Power-to-weight ratio also matters for regulatory reasons in some Australian states, where provisional (P-plate) drivers have historically faced restrictions on driving high-powered vehicles, sometimes expressed partly in terms of power-to-weight thresholds alongside engine type and listed vehicle bans. These rules vary by state and have changed over time, so if you're checking whether a specific car is allowed for a provisional licence, always confirm against your current state road authority's official list rather than relying on a power-to-weight figure alone.
How to calculate it and what it tells you
Power-to-weight ratio is calculated simply as kW รท tonnes, where weight is converted from kilograms to tonnes by dividing by 1,000 (so a 1,500kg car is 1.5 tonnes). The result tells you how much engine power is available per tonne of vehicle mass the engine has to move โ a higher number generally correlates with quicker acceleration, though real-world performance also depends on factors like gearing, torque delivery, drivetrain losses, tyre grip and aerodynamics that a simple ratio doesn't capture.
In the context of provisional licensing, some Australian states maintain restrictions on P-plate drivers using particular high-performance vehicles, which have at times referenced power-to-weight thresholds (commonly cited historically around the 130 kW/t mark in some jurisdictions) in addition to specific banned vehicle lists and turbocharged/supercharged engine restrictions. Because these thresholds, the vehicles covered, and even whether a power-to-weight rule applies at all differ between states and get updated periodically, treat any specific number as a general guide only and check your state's current road authority rules before assuming a car is or isn't allowed.
Frequently asked questions
It's relative โ family cars often sit in the 60-90 kW/t range, while performance cars can exceed 150-200+ kW/t. There's no single 'good' number; it depends on what you're comparing against.
Kerb (or tare) weight โ the vehicle's weight unladen, without passengers or cargo โ is the standard figure used for power-to-weight comparisons and the one most commonly listed on compliance plates and spec sheets.
No โ rules differ significantly between Australian states and territories, and some use specific banned-vehicle lists rather than, or in addition to, a power-to-weight threshold. Always check your own state's current road authority guidance.
Generally it correlates with quicker acceleration, but actual performance also depends on gearing, torque curve, drivetrain type, tyres and aerodynamics, so two cars with the same ratio can still perform differently.
Check the vehicle's compliance plate, owner's manual, or the manufacturer's official specifications page โ figures can vary slightly between trim levels and model years of the same car.