'Lineal metre' (sometimes spelled linear metre) trips a lot of people up when quoting timber, decking, flooring, carpet or fencing, because materials are priced by length, but the job is usually measured in area. A lineal metre is simply one metre of material measured along its length, regardless of its width โ so converting between the two depends entirely on how wide the specific product is.
This calculator converts either direction: give it an area and a board width to find total lineal metres required, or give it lineal metres and a width to find the area it will cover.
The formula
Lineal metres = Area (mยฒ) รท Material width (m), and conversely Area (mยฒ) = Lineal metres ร Material width (m). Because width is usually quoted in millimetres, this calculator converts it to metres internally before dividing.
Don't forget wastage
This calculator gives you the theoretical minimum โ real jobs need extra for offcuts, mistakes, and pattern matching (especially with flooring or diagonal decking layouts). Adding 5-10% on top of the calculated lineal metres is a common rule of thumb for a straightforward layout, and more for anything with angles or a complex pattern.
Frequently asked questions
A square metre is a unit of area (length ร width); a lineal metre is just one metre of length along a product, regardless of its width. You need to know the product's width to convert between the two.
It depends entirely on the board width โ a 90mm board needs about 222 lineal metres to cover 20mยฒ (20 รท 0.09), while a 137mm board needs only around 146 lineal metres for the same area. Enter your exact board width above for a precise figure.
Yes โ 5-10% extra is a common allowance for straightforward layouts, more for diagonal patterns, hips, or complex cuts.