๐Ÿ‡ฆ๐Ÿ‡บ Free Australian calculators โ€” rates updated for FY2026โ€“27
Home Improvement & Construction

Tile Calculator

Work out exactly how many tiles โ€” and how many boxes โ€” you need for your job, including a sensible wastage allowance.

๐Ÿ•’ Updated September 2026๐Ÿ‡ฆ๐Ÿ‡บ Australia-specific๐Ÿ’ฏ Free, no signup

๐Ÿงฎ Calculate your tile requirements

Tiling jobs almost always need more material than the raw area suggests, because cuts around edges, obstacles (like toilets or vanities) and pattern layouts all create wastage โ€” and running short mid-job, especially with a specific batch/shade of tile, can mean an unmatched replacement box from a different production run.

This calculator works out how many tiles and full boxes you need, with a wastage allowance that scales with how complex your layout is.

The calculation

First, area per tile is calculated from your tile's dimensions. Then Tiles needed = (Area to tile รท Area per tile) ร— (1 + wastage %), rounded up to the nearest full box, since tiles are sold by the box, not individually.

Why wastage allowance should match your layout

A simple straight-lay pattern in a rectangular room might only need a 10% wastage allowance, but a diagonal layout, herringbone pattern, or a room with lots of corners, doorways and fixtures to cut around can easily need 15-20% extra โ€” cuts around obstacles often produce offcuts too small to reuse elsewhere in the job.

Frequently asked questions

How much extra tile should I buy for wastage?+

10% is a common minimum for a straightforward, rectangular room with a simple straight-lay pattern; 15-20% is more realistic for diagonal layouts, herringbone patterns, or rooms with lots of cuts around fixtures and corners.

Should I buy all my tiles from the same batch?+

Yes, wherever possible โ€” tiles from different production batches can have subtle but noticeable colour or shade variations, so buying enough from a single batch upfront (including your wastage allowance) avoids a mismatched patch if you run short.

How do I calculate tiles needed for an L-shaped room?+

Split the room into simpler rectangular sections, calculate the area of each separately, add them together for total area, then apply the same tiles-per-box and wastage calculation to the combined total.

General information only. This calculator provides estimates for planning purposes and does not constitute financial, tax, legal or medical advice. Figures are based on publicly available Australian rates and rules current as of September 2026; always confirm specifics with the ATO, a licensed adviser, or the relevant government body before making a decision.

Related calculators