๐Ÿ‡ฆ๐Ÿ‡บ Free Australian calculators โ€” rates updated for FY2026โ€“27
Home Improvement & Construction

LRV (Light Reflectance Value) Calculator

Compare and understand Light Reflectance Values when choosing paint colours for your home.

๐Ÿ•’ Updated October 2026๐Ÿ‡ฆ๐Ÿ‡บ Australia-specific๐Ÿ’ฏ Free, no signup

๐Ÿงฎ Compare two LRV values

Light Reflectance Value (LRV) is a number from 0 to 100 that tells you how much visible light a paint colour reflects versus absorbs โ€” 0 is theoretical absolute black (reflects no light) and 100 is theoretical absolute white (reflects all light). An LRV calculator lets you compare two colours side by side and see the gap between them, which is genuinely useful when you're picking a wall colour and a trim, ceiling or adjoining-room colour and want enough contrast that the colours don't blend into a flat, undefined mush.

LRV matters more than most people expect when choosing paint, because the same colour chip can look completely different depending on how much natural light a room gets. A mid-tone grey with an LRV around 40-50 might read as crisp and neutral in a bright, north-facing room but feel noticeably flat and grey in a dim, south-facing hallway. This tool helps you reason about contrast and brightness numerically rather than guessing from a small swatch under showroom lighting.

How to read LRV numbers

As a rough general guide, LRVs under about 20 are considered dark, 20-50 are mid-tones, and above 50 trend light, with anything above about 80 reading as close to white. These bands are indicative only โ€” perception also depends on the colour's hue and saturation, not just its LRV. A general styling guideline many painters and decorators use is to aim for at least a 10-20 point LRV gap between a wall and its trim or ceiling if you want the trim to visually 'pop' rather than blend in.

Darker LRV colours (lower numbers) absorb more light and can make a small or poorly-lit room feel smaller and more enclosed, while higher LRV colours bounce light around and tend to make spaces feel larger and brighter โ€” which is why low-light rooms are often recommended lighter colours, and why feature walls in dark tones tend to work best in rooms that already get plenty of natural light.

Where to find LRV for Australian paint brands

Most major Australian paint brands publish LRV figures for their colour ranges, either printed on the physical swatch, on the tin, or searchable through the brand's online colour tool. If you can't find a published LRV for a specific colour, many paint retailers' in-store staff can look it up from their colour-matching system.

Frequently asked questions

What's considered a good LRV for a living room?+

There's no single 'correct' LRV โ€” it depends on how much natural light the room gets and the mood you want. Mid-range LRVs (roughly 40-65) are a common, safe choice for living areas that get moderate light.

Does a higher LRV mean a 'better' colour?+

No โ€” LRV only measures lightness/darkness, not quality. A high-LRV white and a low-LRV navy can both be excellent choices depending on the room and style you're going for.

Can two different colours have the same LRV?+

Yes. LRV only describes reflectance, not hue, so a pale blue and a pale green could share a similar LRV while looking quite different.

Does LRV affect how much paint I need?+

Not directly, though very dark colours (low LRV) applied over a light base, or vice versa, often need an extra coat for even coverage โ€” factor that into your paint-quantity budget.

Sources & further reading:
General information only. Always confirm the exact LRV with the paint manufacturer's own published data before making a final colour decision, as formulations can change.

Related calculators