Downlight quantity is usually estimated using a simple area-based rule of thumb โ roughly one downlight per 1.4-2 square metres for general room lighting โ though the right number also depends on ceiling height, desired brightness, and whether you're aiming for general ambient lighting or targeted task lighting.
This calculator estimates your downlight count from area and coverage, and checks the total load against a standard lighting circuit rating so you know roughly how many circuits your electrician might need to plan for.
Checking your circuit load
Standard Australian lighting circuits are commonly rated at 10 Amps on a 230V supply, giving a nominal capacity of around 2,300 watts โ though in practice, electricians apply diversity factors and won't load a circuit to its absolute maximum. This calculator gives a rough total wattage figure so you and your electrician can sense-check whether your downlight count comfortably fits on a single circuit or needs splitting across more than one โ the final circuit design is always your licensed electrician's call, based on the full AS/NZS 3000 requirements.
Frequently asked questions
Using a common rule of thumb of 1.6mยฒ coverage per downlight, around 12-13 downlights โ though this varies with ceiling height, desired brightness and layout. Adjust the coverage figure above to suit your specific preference.
It depends on the wattage per downlight and the circuit's rated capacity โ a licensed electrician will apply the full AS/NZS 3000 requirements (including diversity factors) to determine the exact safe number for your specific circuit design.
Yes, significantly โ LED downlights commonly use 7-13W to produce similar brightness to a 35-50W halogen downlight, meaning lower running costs and less heat generation for the same room.