An Australian electricity bill has two main components that most people don't separate out mentally: a daily supply charge (a fixed cost just for being connected to the grid, regardless of how much power you use) and a usage charge (based on how many kilowatt-hours you actually consume). Both vary significantly by state, retailer, plan and โ for some plans โ time of day.
This calculator combines both components so you can estimate a bill from your usage and your specific plan's rates, or sanity-check an existing bill against your smart meter's reported usage.
The two-part formula
Total bill = (Usage in kWh ร rate per kWh) + (Supply charge per day ร number of days in billing period)
For a time-of-use or demand tariff plan, this simplified single-rate formula won't capture peak/off-peak or demand charge variations โ check your specific plan's structure if you're on one of those tariff types, since your actual bill will split usage across different rates depending on when you used the electricity.
Why rates vary so much between plans
Electricity retail is deregulated in most of Australia's National Electricity Market states, meaning retailers set their own rates within regulatory guardrails โ the difference between the cheapest and most expensive available plan for an identical household can be substantial. It's worth comparing plans periodically (many states have a government-run comparison service) rather than staying on a retailer's default 'standing offer' rate, which is often not the cheapest available.
Frequently asked questions
The supply charge covers the fixed cost of maintaining your connection to the electricity network โ poles, wires and metering infrastructure โ and applies regardless of how much (or how little) electricity you actually consume in a period.
Check a recent bill, which itemises both figures, or your specific electricity plan's fact sheet from your retailer โ these vary significantly between states, retailers and even between different plans from the same retailer.
Only approximately โ this calculator uses a single flat usage rate. Time-of-use plans (different rates for peak/off-peak/shoulder periods) and solar feed-in credits require a more detailed calculation specific to your plan's structure and usage pattern.