A dilution ratio calculator tells you exactly how much concentrate and how much water to combine to make up a target volume of diluted solution — commonly needed for cleaning chemicals, garden sprays, herbicides, pool chemicals and disinfectants that are sold concentrated and meant to be diluted before use. Product labels typically state a ratio like '1:10' or '1:50', and getting this right matters both for the product to work effectively and, in the case of chemicals like herbicides or disinfectants, for safety and correct dosing.
This calculator takes the ratio as printed on your product label (the concentrate's share and the total or water share) along with how much total diluted solution you want to end up with, and works out the exact litres of each to combine. This is especially useful when you want a different batch size than the standard 'per litre' figure printed on the label — for example, filling a 15-litre garden sprayer rather than mixing exactly one litre at a time.
Understanding how ratios are written
Dilution ratios are written in a couple of different conventions, so it's worth checking which one your product uses. A ratio of '1:20' sometimes means 1 part concentrate to 20 parts water (21 parts total), and sometimes means 1 part concentrate to a total of 20 parts (19 parts water) — commercial cleaning product labels usually specify which convention they're using, but if in doubt, the product's safety data sheet (SDS) will clarify. This calculator treats your second number as the water/remaining-parts figure once you've identified which convention applies, so read your label carefully before entering values.
For garden and pest chemicals specifically, label dilution rates are a legal application rate in Australia, not just a suggestion — using a stronger mix than directed can damage plants, harm non-target organisms, and in some cases breach pesticide use regulations under state environmental or agricultural legislation.
Practical mixing tips
Always add concentrate to water (not the other way around) unless your product's safety data sheet specifically instructs otherwise, and wear the personal protective equipment recommended on the label, especially for anything classed as a hazardous chemical. Mix only what you need for the current job, since many diluted solutions (particularly diluted bleach and some garden chemicals) lose potency within hours to a few days once mixed.
Frequently asked questions
It depends on the product's convention — it usually means either 1 part concentrate to 10 parts water, or 1 part concentrate in a total of 10 parts. Check your product's label or SDS to confirm which convention it uses before mixing.
You generally shouldn't for chemicals like herbicides or disinfectants — label dilution rates are set for a reason, and using a stronger-than-directed mix can be unsafe, wasteful, or in the case of agricultural chemicals, not compliant with the approved use.
Many diluted solutions lose effectiveness within hours to days, especially diluted bleach and some garden sprays — mix only what you'll use in that session where possible.
Only in a correctly labelled container appropriate for the chemical — never store diluted chemicals in food or drink containers, due to serious poisoning risk.