A rain catchment calculator estimates how many litres of water you can realistically collect from a roof over a given rainfall amount, which is the key figure for sizing a rainwater tank or working out whether your current tank is appropriately sized for your roof and local rainfall pattern. The core relationship is simple: 1mm of rain falling over 1 square metre of catchment area yields 1 litre of water in theory, before any losses.
In practice you won't capture 100% of that theoretical yield โ some water is lost to evaporation, gutter overflow during heavy downpours, first-flush diverters (which deliberately discard the initial dirty run-off), and general system inefficiency โ so this calculator applies a collection efficiency percentage you can adjust based on how well-maintained and well-designed your gutter and tank system is. This is useful both for sizing a new tank installation and for understanding roughly how much water you can expect to top up an existing tank with, from forecast or historical rainfall figures.
The basic catchment formula
The underlying calculation is roof catchment area (in mยฒ, measured as the horizontal plan area the roof covers, not the pitched surface area) multiplied by rainfall (in mm) to get litres collected, then multiplied by your collection efficiency percentage to account for real-world losses. For example, a 150mยฒ roof catchment receiving 50mm of rain yields a theoretical 7,500 litres, and at 85% collection efficiency that becomes roughly 6,375 litres actually captured.
Only count the roof area that actually drains toward the gutters connected to your tank โ if your home has multiple roof sections draining to different downpipes and only some feed the tank, use just that portion's area, not the whole roof footprint.
Using this for rainwater tank sizing
To size a tank, it helps to look at typical monthly or seasonal rainfall figures for your area from the Bureau of Meteorology rather than just an annual average, since rainfall in much of Australia is seasonal and a tank sized purely on an annual average can still run dry during a long dry stretch. Many rainwater tank suppliers and some state governments also publish guidance on matching tank size to roof catchment and intended use (garden-only versus whole-house supplemental supply), which is worth checking alongside this calculator if you're planning a significant investment.
Frequently asked questions
In theory, 1mm of rainfall over 1mยฒ of catchment yields 1 litre of water before losses โ so a 100mยฒ roof receiving 20mm of rain has a theoretical yield of 2,000 litres, reduced by your system's collection efficiency.
A commonly used estimate for a reasonably well-maintained gutter and first-flush system is around 80-90%, though a poorly maintained or leaf-clogged system can be considerably lower.
Use the horizontal (plan view) catchment area, not the sloped roof surface area โ rainfall is measured as a vertical depth over a horizontal area, so pitch doesn't increase theoretical catchment.
Yes slightly, since it deliberately discards the first portion of run-off (which carries dust, leaves and roof debris) each time it rains โ but it's generally considered worthwhile for better water quality, and is factored into the efficiency percentage used here.