๐Ÿ‡ฆ๐Ÿ‡บ Free Australian calculators โ€” rates updated for FY2026โ€“27
Home Improvement & Construction

TV Wall Mount Height Calculator

Work out the ideal height to mount your TV so the screen centre sits at comfortable eye level.

๐Ÿ•’ Updated October 2026๐Ÿ‡ฆ๐Ÿ‡บ Australia-specific๐Ÿ’ฏ Free, no signup

๐Ÿงฎ Calculate your ideal TV mounting height

A TV wall mount height calculator works out the ideal height to centre your TV on the wall so the screen sits roughly at eye level for your main viewing position, which is the most common recommendation for comfortable long-term viewing. Mounting a TV too high is one of the most frequent regrets after a wall-mount install โ€” it looks striking in a showroom but causes neck strain during a two-hour movie โ€” so working this out before you drill is worth the five minutes.

The general guideline used by home theatre installers is to position the centre of the screen at or close to seated eye height for the room's main seating position, then adjust from there based on room layout, ceiling height and whether other people will be standing or lying down while watching. This calculator estimates the screen's centre height from your seated eye height and screen size so you know where to centre the mounting bracket, measured from the floor.

Why screen size affects the ideal mounting height

Larger screens have a taller overall height, so to keep the centre of the screen at eye level, a bigger TV needs its bracket positioned lower on the wall than you might instinctively expect โ€” otherwise the top of a large screen can end up uncomfortably high, forcing you to tilt your head back. This calculator factors in your screen's approximate physical height (worked out from its diagonal size and standard 16:9 aspect ratio) when recommending a bracket height.

For a bedroom TV watched mainly lying down, the ideal centre height is generally lower than a seated eye-level figure, since lying eye height is considerably lower than seated eye height โ€” this calculator adjusts for that if you select 'lying down' as your main viewing position.

Other things to consider before mounting

Check where your wall studs are, and confirm the wall material and mount's weight rating can safely support your TV โ€” a cheap mount or a TV screwed only into plasterboard without appropriate anchors is a common cause of mounts failing. If you're running cables through the wall, check for existing wiring, insulation and any fire-rating requirements for the cavity, and consider whether you'll need an in-wall rated cable or conduit.

Frequently asked questions

What's the general rule for TV mounting height?+

A common guideline is to centre the screen at roughly seated eye level for your main viewing spot, then adjust slightly for room layout and glare from windows or lights.

Is it better to mount a TV too high or too low?+

Generally too low is the lesser problem โ€” you can always add a stand or adjust seating, whereas a TV mounted too high often causes persistent neck strain and is harder to fix without remounting.

Does this calculator account for a tilting or full-motion mount?+

It gives a good static starting height; a tilting or full-motion mount gives you some flexibility to fine-tune the viewing angle afterward, which can help if your ideal height sits between two stud positions.

Should bedroom TVs be mounted lower than living room TVs?+

Often yes, if they're mainly watched lying down, since lying eye height is lower than seated eye height โ€” select the 'lying down' option in this calculator for a more suitable bedroom recommendation.

Sources & further reading:
General information only. Always confirm wall type, stud locations and the mount's weight rating with the manufacturer's instructions before installing.

Related calculators