๐Ÿ‡ฆ๐Ÿ‡บ Free Australian calculators โ€” rates updated for FY2026โ€“27
Home Improvement & Construction

Concrete Calculator

Work out exactly how much concrete you need โ€” in cubic metres or pre-mixed bags โ€” for your slab, footing or path.

๐Ÿ•’ Updated September 2026๐Ÿ‡ฆ๐Ÿ‡บ Australia-specific๐Ÿ’ฏ Free, no signup

๐Ÿงฎ Calculate your concrete volume

Concrete is sold either as bulk ready-mix (priced and delivered by the cubic metre, the standard for anything beyond a small job) or as pre-mixed bags for small DIY jobs โ€” and knowing which one makes sense starts with knowing your actual volume in cubic metres.

This calculator converts your slab or footing's dimensions into cubic metres, and estimates the number of standard 20kg bags if you're going the DIY bagged-mix route.

The volume formula

Volume (mยณ) = Length ร— Width ร— Depth (in metres). Since depth is usually specified in millimetres for concrete work, this calculator converts it to metres internally before multiplying.

Bulk ready-mix vs bagged concrete

As a rough guide, a standard 20kg bag of pre-mixed concrete yields around 0.01 cubic metres once mixed โ€” meaning even a modest 1 cubic metre pour needs roughly 100 bags, which quickly becomes more expensive and more physically demanding than ordering bulk ready-mix once you're past a small job like fence post footings or a tiny path section. As a rough threshold, most tradespeople switch to bulk ready-mix delivery once a job exceeds about 0.5-1 cubic metre.

Frequently asked questions

How many 20kg bags of concrete make 1 cubic metre?+

Roughly 100 bags, since a standard 20kg bag yields approximately 0.01 cubic metres of mixed concrete โ€” which is why bulk ready-mix becomes more practical and cost-effective beyond a small job.

What depth of concrete do I need for a driveway vs a path?+

A standard pedestrian path is often around 75-100mm; vehicle driveways typically need more (100-150mm or more) depending on the vehicle load and local conditions and any reinforcement mesh used โ€” check local guidance or an engineer's advice for anything carrying vehicle weight.

Should I add extra concrete for wastage?+

Yes โ€” a common allowance is 5-10% extra to account for uneven sub-base, spillage and minor measurement variance, especially for a DIY pour.

Sources & further reading:
General information only. This calculator provides estimates for planning purposes and does not constitute financial, tax, legal or medical advice. Figures are based on publicly available Australian rates and rules current as of September 2026; always confirm specifics with the ATO, a licensed adviser, or the relevant government body before making a decision.

Related calculators