๐Ÿ‡ฆ๐Ÿ‡บ Free Australian calculators โ€” rates updated for FY2026โ€“27
Home Improvement & Construction

Paint Calculator

Work out exactly how many litres of paint you need โ€” and roughly what it'll cost โ€” for your next painting job.

๐Ÿ•’ Updated September 2026๐Ÿ‡ฆ๐Ÿ‡บ Australia-specific๐Ÿ’ฏ Free, no signup

๐Ÿงฎ Calculate your paint requirements

Paint calculations go wrong in one of two predictable ways: forgetting that two coats (the standard for a good finish, especially over a colour change) roughly doubles your litres needed, or using the coverage rate off a different product than the one you're actually buying. Coverage rates genuinely vary between paint brands and even between different product lines from the same brand.

This calculator uses your actual wall area, your paint's specific coverage rate, and your planned number of coats to give a litres figure โ€” and an estimated cost if you know the price per litre.

The formula

Litres needed = (Wall area รท Coverage rate per litre) ร— Number of coats

Always check the coverage rate printed on your specific paint tin rather than assuming a generic figure โ€” it varies by product, and can be notably lower on bare plasterboard, previously unpainted surfaces, or textured/rough finishes compared to a smooth, previously painted wall.

Rounding up to full tins

Paint is sold in fixed tin sizes (commonly 1L, 4L, 10L and 15L), so your calculated litres figure needs to be rounded up to the nearest combination of tins you can actually buy โ€” and it's generally worth buying slightly extra from the same batch/tint run for touch-ups later, since colour matching a paint exactly months or years later isn't always possible.

Frequently asked questions

How many coats of paint do I need?+

Two coats is the standard for a durable, even finish, especially over a colour change or bare surface. A single coat can sometimes work for a very minor touch-up in the same colour, but generally won't give full, even coverage.

Does paint coverage differ between brands?+

Yes, sometimes significantly โ€” always check the coverage rate specified on your particular product's tin or technical data sheet rather than assuming a generic 16 mยฒ/L figure applies to every paint.

Should I subtract door and window areas from my wall area?+

For a precise calculation, yes โ€” though many people simply add a small buffer (5-10%) to a full wall area calculation instead, since the extra paint from not subtracting openings roughly covers wastage and a second coat touch-up anyway.

General information only. This calculator provides estimates for planning purposes and does not constitute financial, tax, legal or medical advice. Figures are based on publicly available Australian rates and rules current as of September 2026; always confirm specifics with the ATO, a licensed adviser, or the relevant government body before making a decision.

Related calculators