🇦🇺 Free Australian calculators — rates updated for FY2026–27
Home Improvement & Construction

Pool Volume Calculator

Calculate your pool's total water volume — essential for accurate chemical dosing.

🕒 Updated September 2026🇦🇺 Australia-specific💯 Free, no signup

🧮 Calculate your pool volume

Knowing your pool's exact volume matters for more than curiosity — chemical dosing (chlorine, pH adjusters, algaecides), heater and pump sizing, and estimating water costs and fill time all depend on an accurate litre figure, not a rough guess.

This calculator handles the three most common pool shapes using standard geometric volume formulas, converting cubic metres to litres for you automatically.

The formulas used

Rectangular: Length × Width × Average depth × 1,000 (to convert m³ to litres).

Round: π × (radius)² × Average depth × 1,000, where radius is half the diameter you enter.

Oval: π × (Length ÷ 2) × (Width ÷ 2) × Average depth × 1,000.

For a sloped-floor pool (shallow to deep end), using the average of the shallow and deep depths gives a good approximation of true volume for dosing purposes.

Why volume matters for chemical dosing

Chlorine, pH adjusters, algaecides and most other pool chemicals are dosed based on your pool's total volume — using an inaccurate (especially underestimated) volume figure risks under- or over-dosing, which can mean anything from ineffective sanitisation to chemical damage to pool surfaces and equipment. Recalculate if you've ever modified your pool's depth or shape, or if you've never actually confirmed the volume against the original pool specifications.

Frequently asked questions

How do I calculate the volume of an irregularly shaped pool?+

For genuinely irregular shapes, break the pool into simpler sections (a rectangle plus a semicircle, for example), calculate each section's volume separately using the appropriate formula, then add them together — or use your pool's original design specifications if available.

Should I use average depth or maximum depth for dosing?+

Average depth (the mean of your shallowest and deepest points) gives a more accurate total volume than using the maximum depth across the whole pool area, which would overestimate volume for a sloped-floor pool.

How many litres is a standard backyard pool?+

It varies hugely by size, but a common suburban pool (around 8m × 4m, 1.4m average depth) holds roughly 45,000 litres — always calculate your own pool's specific dimensions for accurate dosing rather than assuming a 'typical' figure.

General information only. This calculator provides estimates for planning purposes and does not constitute financial, tax, legal or medical advice. Figures are based on publicly available Australian rates and rules current as of September 2026; always confirm specifics with the ATO, a licensed adviser, or the relevant government body before making a decision.

Related calculators