Fence quotes are built on two basic quantities: how many posts you need, set at intervals along the run, and how much panelling or lineal metreage fills the gaps between them โ get either number wrong and you're either back at the hardware store or looking at a surprisingly large offcut pile.
This calculator works out both from your fence length and chosen post spacing, with an optional cost estimate.
The formula
Posts needed = (Fence length รท post spacing) + 1 (the +1 accounts for the post at the very start of the run). Panel or lineal metre requirements then follow directly from the same total length, adjusted for your specific panel width if you're using fixed-width prefabricated panels rather than continuous palings.
Frequently asked questions
Commonly 2.1-2.4m for standard timber or colorbond fencing, though this can vary based on the fencing material, wind exposure, and manufacturer specifications for prefabricated panel systems โ check your specific product's requirements.
Generally yes โ corner and end posts bear more structural load than posts along a straight run, and are often recommended to be a larger size or additionally braced, particularly for taller or heavier fencing.
Yes โ a sloping site often needs individually cut panels (stepped or raked) rather than uniform prefabricated panels, which can increase both material and labour requirements compared to a flat, level run.