Paving calculations follow the same basic logic as tiling โ divide your total area by the area of a single paver, then add a wastage allowance for cuts around edges, curves and garden beds โ but paving jobs are often larger and more exposed to irregular boundaries than an indoor tiling job, so getting the wastage allowance realistic matters even more.
This calculator works out your paver count and an estimated material cost.
The formula
Pavers needed = (Area รท area per paver) ร (1 + wastage %), rounded up to a whole number since you can't buy a fraction of a paver. Curved paths, circular patios, or herringbone/basketweave laying patterns typically need a higher wastage allowance (15-20%) than a simple straight-edged rectangular area (10%).
Frequently asked questions
10% is reasonable for a simple rectangular area; 15-20% for curved edges, circular designs, or a complex laying pattern with more cuts.
Generally yes for a long-lasting result โ edge restraints (concrete, steel or plastic) prevent pavers from spreading or shifting over time, particularly for driveways or high-traffic areas.
A properly compacted road base or sand bedding layer is standard beneath most paving to prevent settling and movement โ the specific base depth and material depends on whether it's a pedestrian path or a vehicle-trafficked area.