๐Ÿ‡ฆ๐Ÿ‡บ Free Australian calculators โ€” rates updated for FY2026โ€“27
Home Improvement & Construction

Gas Strut Force Guide

Get a rough starting estimate of the gas strut force you need for a hinged lid, door or bonnet โ€” always verify against the specific application's chart.

๐Ÿ•’ Updated September 2026๐Ÿ‡ฆ๐Ÿ‡บ Australia-specific๐Ÿ’ฏ Free, no signup

๐Ÿงฎ Estimate the gas strut force needed

Gas struts (gas springs) support hinged lids, doors, bonnets and hatches by counteracting their weight โ€” but selecting the right force rating depends on more than just the weight being lifted, because the geometry of where the strut mounts relative to the hinge and the object's centre of gravity changes how much force is actually needed.

This calculator gives a simplified starting estimate based on a basic lever-arm ratio โ€” for anything structurally important or safety-critical, check the specific manufacturer's selection chart or calculator, which accounts for the full geometry and opening angle.

Why geometry matters as much as weight

A gas strut mounted further from the hinge than the object's centre of gravity needs proportionally less force than one mounted closer in, because of basic lever mechanics โ€” this is why two seemingly similar cabinet doors of the same weight can need quite different strut force ratings depending on exactly where the strut is mounted. Manufacturer selection charts and calculators account for this precisely, including the changing angle through the full range of motion, which this simplified estimate does not fully capture.

Frequently asked questions

Is this calculator exact enough to order a gas strut?+

Treat it as a rough starting estimate only โ€” for an accurate force rating, use the specific manufacturer's gas strut selection calculator or chart, which accounts for the full opening geometry and angle range, not just a simplified lever ratio.

What happens if I choose a gas strut with too little force?+

The lid or door will feel heavy to lift and may not stay open on its own, potentially closing unexpectedly โ€” a safety concern for anything overhead.

What happens if the force rating is too high?+

The lid or door can spring open too forcefully or be difficult to close and hold down, which can also be a safety and usability issue depending on the application.

General information only. This calculator provides estimates for planning purposes and does not constitute financial, tax, legal or medical advice. Figures are based on publicly available Australian rates and rules current as of September 2026; always confirm specifics with the ATO, a licensed adviser, or the relevant government body before making a decision.

Related calculators